Archiv der Kategorie: Allgemein

210-250 SECFND Prüfungsfragen, 210-250 Examensfragen

Veröffentlicht am von
Kommentar

210-250 SECFND Prüfungsfragen, 210-250 Examensfragen Understanding Cisco Cybersecurity Fundamentals (ICND2 v3.0) www.it-pruefungen.de

Exam Number 210-250 SECFND
Associated Certifications CCNA Cyber Ops
Duration 90 Minutes (55-60 questions)
Available Languages English
Register Pearson VUE

This exam is the first of the two required exams to achieve the CCNA Cyber Ops certification and is aligned with the job role of an associate-level Security Operations Center (SOC) Security Analyst. The SECFND exam tests candidates understanding of cybersecurity’s basic principles, foundational knowledge, and core skills needed to grasp the more advanced associate-level materials in the second required exam, “Implementing Cisco Cybersecurity Operations (SECOPS)”.

Prüfungsvorbereitung 210-250 SECFND Studienmaterialien deutsch Understanding Cisco Cybersecurity Fundamentals https://www.it-pruefungen.de/210-250.htm

The following course is the recommended training for this exam:

Understanding Cisco Cybersecurity Fundamentals (SECFND)
Self paced eLearning | Instructor led training

Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you.

IT-Prüfungen 210-250 SECFND Understanding Cisco Cybersecurity Fundamentals www.it-pruefungen.de

210-065 IT-Prüfungen, 210-065 zertifizierung

Veröffentlicht am von
Kommentar

210-065 IT-Prüfungen, 210-065 zertifizierung Implementing Cisco Video Network Devices v1.0 www.it-pruefungen.de

QUESTION: 1

Which four features are provided by Cisco TelePresence Management Suite? (Choose four.)

A. Scheduling of video conference calls
B. Built-in-bridge functionality for multiparty video conferences
C. SIP-H.323 protocol interworking
D. Centralized management of conference resources
E. SMTP email event notification
F. Endpoint configuration backup and restore
G. Cisco TelePresence endpoint automated redundancy
H. Automated resource optimization

Answer: A,D,E,F

QUESTION: 2

Management wants to modify Cisco TMS to allow users to configure the call behavior with their associated devices and dial from a single ID. Which feature needs to be enabled and configured?

A. Smart Scheduler
B. Low-touch Provisioning
C. FindMe
D. CMR Provisioning

Answer: C

210-065 Prüfungsfragen, 210-065 Examensfragen Implementing Cisco Video Network Devices v1.0 (ICND2 v3.0) https://www.it-pruefungen.de/210-065.htm

QUESTION: 3

Which three features are supported by Cisco TMSPE? (Choose three.)

A. Simplified provisioning
B. LDAP user import
C. Scheduling via Microsoft Outlook
D. FindMe
E. Jabber for Windows
F. Automatic endpoint upgrades

Answer: A,B,D

QUESTION: 4

Which three features does Cisco VCS provide? (Choose three.)

A. native Cisco SCCP telephony integration
B. SIP-H.323 interworking functionality
C. native scheduling
D. SIP trunk integration with Cisco Unified Communications Manager
E. third-party standards-based H.323 and SIP device registration
F. reverse proxy functionality

Answer: B,D,E

Prüfungsvorbereitung Studienmaterialien 210-065 deutsch Implementing Cisco Video Network Devices v1.0 www.it-pruefungen.de

QUESTION: 5

A technician is tasked with performing a room readiness assessment in preparation for an immersive video endpoint. What are three Cisco best practices regarding lighting recommendations for the room? (Choose three.)

A. The bulb temperature should be between 4000 and 4100K.
B. Key lighting should be between 200 and 400 Lux with the endpoint powered on.
C. Shoulder lighting should not exceed two times the facial lighting values with the endpoint off.
D. Use direct lighting fixtures.
E. Within the camera field of view, the lighting for all parts of the room should not fluctuate more than 100 Lux.
F. Avoid using dimming light control systems.

Answer: A,C,E

Prüfungsvorbereitung auf 210-060

Veröffentlicht am von
Kommentar

Prüfungsvorbereitung auf 210-060 Studienmaterialien deutsch Implementing Cisco Collaboration Devices (CICD) www.it-pruefungen.de

QUESTION: 1

A user reports that when they receive a voicemail on their phone, they do not receive it in their email as well. Which feature on Cisco Unity Connection should be checked?

A. Cisco Unified Messaging Service
B. Enterprise Parameters
C. Roles
D. Message Waiting Indicators
E. Alternate MWI

Answer: A

QUESTION: 2

An engineer receives a service ticket because a user cannot log into Cisco Unified CM User Options. Where can the engineer verify that the user account is active?

A. LDAP System Configuration
B. LDAP Directory
C. End User Configuration
D. LDAP Authentication
E. Route Plan Report

Answer: C

QUESTION: 3

Which port is the default port for SCCP call signaling on Cisco Unified Communications Manager?

A. 2000
B. 2443
C. 5060
D. 5061

Answer: A

IT-Prüfungen 210-060 Implementing Cisco Collaboration Devices (CICD) https://www.it-pruefungen.de/210-060.htm

QUESTION: 4

Which type of signaling does desktop control mode use to control a desk phone?

A. CTIQBE
B. SIP
C. XMPP
D. SCCP

Answer: A

QUESTION: 5

Which three methods can remotely force a Cisco Unified Communications Manager Express phone to reset? (Choose three.)

A. Issue a shutdown, no shutdown command on a switch port that provides PoE to a Cisco phone.
B. Issue the restart command under the ephone-dn configuration of the phone.
C. Issue the reset command under the ephone configuration of the phone.
D. Issue the reset command under the ephone-dn configuration of the phone.
E. Issue the reset H.H.H (mac-address) command telephony-service configuration.
F. Issue the reset H.H.H (mac-address) command under global configuration.

Answer: A,C,E

210-060 Prüfungsfragen Implementing Cisco Collaboration Devices (CICD) www.it-pruefungen.de

QUESTION: 6

The IP phone of user A is registered with Cisco Unified Communications Manager subscriber1 while the IP phone of user B is registered with subscriber2. User A is speaking to user B on an active call. A junior network engineer mistakenly reboots subscriber1.

What effect does this have on the call?

A. User A can hear B, but B cannot hear A.
B. User A cannot hear B, but B can hear A.
C. This action drops the call.
D. This action does not affect the call.
E. The call remains active, but quality may suffer.

Answer: D

200-355 Prüfungsfragen, 200-355 Examensfragen

Veröffentlicht am von
Kommentar

200-355 Prüfungsfragen, 200-355 Examensfragen Implementing Cisco Wireless Network Fundamentals (ICND2 v3.0) www.it-pruefungen.de

QUESTION 1
A network engineer in the GUI of WCS version 7 wants to add an autonomous access point. Where can this command be found in the drop-down menu?

A. Configure > Access Point > Add Autonomous APs
B. Manage > Access Points > Add Autonomous APs
C. Administration > Access Point > Add Autonomous APs
D. Location > Access Point > Add Autonomous APs

Answer: A

QUESTION 2
Access points must discover a wireless LAN controller before they can become an active part of the network. In which order does an access point try to discover a controller?

A. Layer 3 CAPWAP or LWAPP broadcast discovery DHCP option 43 Locally stored controller IP address
discovery
DNS controller name resolution
B. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DNS
controller
name resolution DHCP option 43
C. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DHCP
option
43 DNS controller name resolution
D. DNS controller name resolution DHCP option 43 Layer 3 CAPWAP or LWAPP broadcast discovery Locally
stored controller IP address discovery

Answer: C

Prüfungsvorbereitung Studienmaterial 200-355 deutsch Implementing Cisco Wireless Network Fundamentals https://www.it-pruefungen.de/200-355.htm

QUESTION 3
How many dBm is 40 mW?

A. 10 dBm
B. 16 dBm
C. 20 dBm
D. 22 dBm
E. 40 dBm

Answer: B

QUESTION 4
Which CAPWAP AP management-access method is available as the default setting?

A. only the console port
B. the console port and SSH
C. the console port, SSH, and HTTPS
D. SSH only

Answer: A

IT-Prüfungen 200-355 Implementing Cisco Wireless Network Fundamentals www.it-pruefungen.de

QUESTION 5
When the pre-shared key authentication method is used for WPA or WPA2, for which two functions is the pre-shared key used? (Choose two.)

A. to act as the Group Transient Key during the bidirectional handshake
B. to act as the Pairwise Master Key during the bidirectional handshake
C. to derive the nonce at each side of the exchange
D. to derive the Pairwise Transient Key

Answer: BD

IT-Prüfungen 200-310

Veröffentlicht am von
Kommentar

IT-Prüfungen 200-310 Designing for Cisco Internetwork Solutions www.it-pruefungen.de

QUESTION: 1

Which three technologies are recommended to be used for WAN connectivity in today’s Enterprise Edge designs? (Choose three.)

A. DWDM
B. Metro Ethernet
C. Frame Relay
D. MPLS VPN
E. ISDN
F. DSL
G. Wireless

Answer: A,B,D
Explanation:
There is some discussion about whether ISDN not DWDM should be the answer but it does say TODAYS network

QUESTION: 2

What three considerations should be taken into account when selecting a routing protocol? (Choose three.)

A. classful routing
B. scalability
C. default route origination
D. multi vendor support
E. link load balancing
F. hop count

Answer: B,D,E

200-310 Prüfungsfragen, 200-310 Examensfragen Designing for Cisco Internetwork Solutions (ICND2 v3.0) https://www.it-pruefungen.de/200-310.htm

QUESTION: 3

Which two methods are used to reduce the mesh links required between iBGP peers in the same AS? (Choose two.)

A. community
B. router reflectors
C. local preference
D. confederations
E. atomic aggregate
F. MED

Answer: B,D

QUESTION: 4

What technology can secure data over an insecure medium and provide WAN redundancy in the event of a primary connection failure?

A. virtual private network
B. shadow PVC
C. dial-up ISDN
D. GRE Tunnel

Answer: A

Prüfungsvorbereitung Studienmaterial 200-310 deutsch Designing for Cisco Internetwork Solutions www.it-pruefungen.de

QUESTION: 5

When designing a WAN backup for voice and video applications, what three types of connections should be used? (Choose three.)

A. Private WAN
B. internet
C. ISDN
D. MPLS
E. dial-up
F. ATM
G. DSL

Answer: A,C,D

200-125 IT-Prüfung, 200-125 zertifizierung

Veröffentlicht am von
Kommentar

200-125 CCNA IT-Prüfung, 200-125 zertifizierung CCNA Cisco Certified Network Associate CCNA (v3.0) www.it-pruefungen.de

Q1
Where does routing occur within the DoD TCP/IP reference model?

A. application
B. internet
C. network
D. transport

Answer: B

Q2
Which of the following correctly describe steps in the OSI data encapsulation process? (Choose two.)

A. The transport layer divides a data stream into segments and may add reliability and flow control information.
B. The data link layer adds physical source and destination addresses and an FCS to the segment.
C. Packets are created when the network layer encapsulates a frame with source and destination host addresses and protocol-related control information.
D. Packets are created when the network layer adds Layer 3 addresses and control information to a segment.
E. The presentation layer translates bits into voltages for transmission across the physical link.

Answer: A,D

CCNA 200-125 Prüfungsfragen, 200-125 Examensfragen CCNA Cisco Certified Network Associate CCNA (v3.0) (ICND2 v3.0) https://www.it-pruefungen.de/200-125.htm

Q3
What is the difference between a CSU/DSU and a modem?

A. A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals from a router to a leased line.
B. A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital
signals from a router to a leased line.
C. A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals from a router to a phone line.
D. A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals from a router to a phone line.

Answer: D

Q5
A receiving host computes the checksum on a frame and determines that the frame is damaged. The frame is then discarded. At which OSI layer did this happen?

A. session
B. transport
C. network
D. data link
E. physical

Answer: D

CCNA Prüfungsvorbereitung Studienmaterial 200-125 deutsch CCNA Cisco Certified Network Associate CCNA (v3.0) www.it-pruefungen.de

200-105 ICND2 Prüfungen, 200-105 zertifizierungen

Veröffentlicht am von
Kommentar

200-105 ICND2 Prüfungen, 200-105 zertifizierungen Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) www.it-pruefungen.de

Exam Number 200-105 ICND2
Associated Certifications CCNA Routing & Switching
Duration 90 Minutes (55 – 65 questions)
Available Languages English, Japanese
Register Pearson VUE
Exam Policies Read current policies and requirements
Exam Tutorial Review type of exam questions

This exam tests a candidate’s knowledge and skills related to LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, and infrastructure maintenance.

200-105 ICND2 Prüfungsfragen, 200-105 ICND2 Examensfragen Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) https://www.it-pruefungen.de/200-105.htm

The following course is the recommended training for this exam.

Interconnecting Cisco Networking Devices, Part 2 (ICND2) v3.0
Cisco Learning Labs for ICND2 v3.0
Cisco Certification Practice Exam by MeasureUp: ICND2 (200-105)
Interconnecting Cisco Networking Devices Part 2 (ICND2) v3.0
CCNA Routing and Switching Training Videos
Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors.

After passing the 100-105 3 weeks ago today I sat for the 200-105 part 2 exam and passed that with 883 points at a passing score of 811 as well.
Here’s my exam experience hoping it might prove useful to some people.

I had a total of 51 questions which included 3 simulations consisting of 4 questions each. I might have gotten lucky again with no device configuration tasks, these simulations only required using show commands to analyze the configuration. While these kind of questions require a lot more time than normal ones, they actually aren’t too hard. This is because for most answer options you should know exactly what to look for in the configs, and then it just turns into a process of deterministic elimination without any ambiguity you sometimes have in normal standalone multiple-choice questions.
I think the only commands I needed to answer these simulation questions were basically just:
show running-config
show ip interface brief
show ip route

I had one question where I’m fairly sure that none of the answers could be considered correct in the context given. Two other questions were IMO very poorly worded, leaving much room for interpretation of multiple correct answers. I commented on them and hope this will be addressed.
A lot of people seem scared of BGP which is now on the blueprint for v3, but I only got a very basic question on it. IPv6 questions were rather basic as well. There were fewer ACL questions than I had expected.

My exam preparation consisted of mainly:
- using packet tracer for layer 2 topics
- using gns3 for routing and all other topics
(Yes, I have never touched a physical Cisco device in my entire life)
- Free Cisco Certified Network Associate (CCNA) Online Tutorials and Study Guides
- Cisco Networking Academy
- PacketLife resources, especially the Cheat Sheets
- various training videos on youtube, for example just by watching basic introduction and configuration videos on GRE, DMVPN and PPPoE I knew enough to answer questions on the exam
- reading in the community here and in other places like reddit
- google whenever you feel like you don’t understand something

As in the previous exam, my strongest areas were Switching, Routing and WAN while my infrastructure maintenance/services scores were not especially impressive (actually I don’t know why, because I felt confident with most of the questions I got).

Prüfungsvorbereitung Studienmaterial 200-105 ICND2 deutsch Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) www.it-pruefungen.de

100-105 ICND1 Prüfungsfragen, 100-105 Examensfragen

Veröffentlicht am von
Kommentar

100-105 ICND1 Prüfungsfragen, 100-105 Examensfragen ICND Interconnecting Cisco Networking Devices Part 1 www.it-pruefungen.de

Exam Number 100-105 ICND1
Associated Certifications CCENT, CCNA Routing & Switching, CCDA, CCNA Security, CCNA Wireless
Duration 90 Minutes (45-55 questions)
Available Languages English, Japanese
Register Pearson VUE
Exam Policies Read current policies and requirements
Exam Tutorial Review type of exam questions

Interconnecting Cisco Networking Devices Part 1 (100-105)

Exam Description

The Interconnecting Cisco Networking Devices Part 1 (ICND1) exam (100-105) is a 90-minute, 45–55 question assessment that is associated with the Cisco Certified Entry Network Technician (CCENT) certification and is a tangible first step in achieving other associate-level certifications. This exam tests a candidate’s knowledge and skills related to network fundamentals, LAN switching technologies, routing technologies, infrastructure services, and infrastructure maintenance.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Prüfungsvorbereitung Studienmaterial 100-105 deutsch ICND Interconnecting Cisco Networking Devices Part 1 https://www.it-pruefungen.de/100-105.htm

This exam tests a candidate’s knowledge and skills related to network fundamentals, LAN switching technologies, routing technologies, infrastructure services, and infrastructure maintenance.

The following course is the recommended training for this exam.

Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
Cisco Learning Labs for ICND1 v3.0
Cisco Certification Practice Exam by MeasureUp: ICND1 (100-105)
Interconnecting Cisco Networking Devices Part 1 (ICND1) v3.0
CCNA Routing and Switching Training Videos
Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you.

IT-Prüfungen 100-105 ICND Interconnecting Cisco Networking Devices Part 1 www.it-pruefungen.de

ACMP_6.4 Prüfungen, ACMP_6.4 zertifizierungen

Veröffentlicht am von
Kommentar

ACMP_6.4 Prüfungen, ACMP_6.4 zertifizierungen Aruba Certified Mobility Professional 6.4 www.it-pruefungen.de

Exam description

The Aruba Certified Mobility Professional V6.4 exam tests your skills on material found in various Aruba course materials and Validated Reference Designs (VRDs). VRDs reflect best practices for designing and deploying Aruba Mobile First Network Solutions. To prepare for this exam HPE recommends courses such as Introduction to Aruba WLANs (IAW), Scalable WLAN Design and Implementation (SWDI), Advanced Troubleshooting (ATS), and the AirWave training course.
Ideal candidate for this exam

Ideal candidates for this exam are networking IT professionals with a minimum of one to two years experience in deploying modern network solutions for the enterprise. Familiarity with Aruba user and CLI guides is suggested, as well as one year experience with Aruba products in actual customer deployments is ideal.

ACMP_6.4 Prüfungsfragen, ACMP_6.4 Examensfragen Aruba Certified Mobility Professional 6.4 https://www.it-pruefungen.de/ACMP_6.4.htm

Exam contents

This exam has 65 questions.
Advice to help you take this exam

Complete the training and review all course materials and documents before you take the exam.
Exam items are based on expected knowledge acquired from job experience, an expected level of industry standard knowledge, or other prerequisites (events, supplemental materials, etc.).
Successful completion of the course alone does not ensure you will pass the exam.
Read this HPE Exam Preparation Guide and follow its recommendations.
Visit HPE Press for additional reference materials, study guides, practice tests, and HPE books.
Objectives

This exam tests your skills on:
Sections/Objectives
6%
Product Knowledge
12%
Firewall Roles and Policies
36%
Operations
23%
Planning and Design
6%
IDS
8%
Troubleshooting
9%
Prüfungsvorbereitung Studienmaterial ACMP_6.4 deutsch Aruba Certified Mobility Professional 6.4 www.it-pruefungen.de
Applications and Solutions

MCSA IT-Prüfungsvorbereitung 70-347 deutsch

Veröffentlicht am von
Kommentar

1. Ihr Unternehmen it-pruefungen.de verwendet Office 365 in einer Hybridbereitstellung. Sie stellen fest, dass einige Active Directory-Benutzerkonten im Office 365 Admin Center nicht verfügbar sind. Sie müssen feststellen, warum die Benutzerkonten in Office 365 nicht verfügbar sind.
Wie gehen Sie vor?

A.Überprüfen Sie die Datei miissetup.log.
B.Verwenden Sie die Microsoft-Remoteverbindungsuntersuchung.
C.Führen Sie das Cmdlet Test-OutlookWebServices aus.
D.Starten Sie den Synchronization Service Manager (MIISClient.exe).

Korrekte Antwort: D

2. Ihr Unternehmen it-pruefungen.de verwendet Office 365 in einer Hybridbereitstellung. Alle Postfächer werden in Office 365 gehostet. Alle Benutzer verwenden Benutzerkonten der On-Premises Umgebung für den Zugriff auf ihre Postfächer. Sie müssen ein Benutzerkonto einschließlich des zugehörigen Postfachs löschen.
Welches Tool verwenden Sie?

A.Das Cmdlet Remove-MsolUser.
B.Das Cmdlet Remove-Mailbox.
C.Das Office 365-Portal.
D.Das Snap-In Active Directory-Benutzer und –Computer.

Korrekte Antwort: D

3. Sie sind als IT-Administrator für das Unternehmen it-pruefungen.de tätig. Das Unternehmen verwendet Office 365 in einer Hybridbereitstellung.
Sie müssen eine neue Gruppe erstellen. Die Gruppe muss folgenden Anforderungen entsprechen:
Gruppeneigenschaften müssen automatisch synchronisiert werden.
Gruppenmitglieder müssen die Möglichkeit haben, zu steuern, welche Benutzer E-Mails an die Gruppe senden können.
Wie gehen Sie vor?

A.Erstellen Sie eine Verteilergruppe und konfigurieren Sie die Einstellungen für den Nachrichtenfluss.
B.Erstellen Sie eine dynamische Verteilergruppe.
C.Erstellen Sie eine neue Rollengruppe.
D.Erstellen Sie eine Verteilergruppe und konfigurieren Sie die Einstellungen für den Beitritt zur Gruppe.

Korrekte Antwort: A

Microsoft MCSA IT-Prüfungsvorbereitung 70-347 deutsch Examfragen Enabling Office 365 Services www.it-pruefungen.de
Wir www.it-pruefungen.de aktualisieren anständig nach den Informationen von Prüfungsabsolventen oder Mitarbeitern von dem Testcenter unsere Prüfungsfragen und Antworten zu Microsoft MCSA 70-347 （(Deutsche Version und Englische Version) Enabling Office 365 Services）.